When my daughter Ellen was four I started teasing her that I was saving all of my boogers in a big booger ball. I don’t know why I told her that except that it was fun to watch her make that “grossed-out” face that kids make when they smell something bad or see a squished cat on the road. She always begged to see it so finally I told her that she couldn’t see it now but I would give it to her for her eighteenth birthday. Well, guess what – she’s turning eighteen and I’ve got to come through with a booger ball!
Here’s the basic steps to successful Booger Ball manufacturing: |
1. You’ll need rubber cement. I used four 4oz bottles from a local office store to make a ball 2” in diameter (it cost around $6-7 total for the four bottles).
2. Colored markers are used to add color to the boogers. Rubber cement dries in a nice neutral mucus color which is great. Boogers, however, are not all the same color. If you’re sick, they might be bright green or if you’re working hard in a dirty building they might be nearly black – remember that your nose is your body’s air filter protecting your lungs from the junk in the air. |
|
|
If you pick too hard or if the air is especially dry, you might find a bit of blood in your boogers. The colored markers in an assortment of colors helps to simulate the array of boogers you might accumulate over 14 years if you were really saving them.
3. A plastic tray, a plastic counter-top or a lid to a plastic tub to spread the cement on is needed also. I used two plastic lids from some storage tubs I had LEGO in. The cement comes off fairly easily but you might want to use something you are not especially attached to just in case there are some unforeseen problems in the project.
|
4. Rubber cement doesn’t come out of porous surfaces so be careful not to get any on the carpet like I did. Take your time and work in an area suited for craft projects. Rubber cement is also a bit smelly and rather flammable – read the bottle and heed the warnings there.
5. Spread the cement on the plastic surface in a uniform layer that’s not too thick. I was tempted to goop it on but when I did the boogers did not turn out as well as they took much longer to dry. |
|
|
6. Allow some time to let the rubber cement to dry. I used two plastic lids so while one was drying I worked on the other. This proved especially efficient.
7. Choose your color palate from the colored markers. Think of all the boogers that you have picked over the years and remember the colors. Purple and pink may not be useful (unless you’ve snorted dry Kool-Aid – ouch!) but the shades of green and brown with the addition of red and black or gray will work great. |
|
|
|
8. Using the colored markers, apply thin stripes of color. I tended to use only one or two colors at a time. You will be making MANY batches of boogers so don’t worry about trying to add too much color in each batch. The rubber cement is a good natural mucus color that only needs an occasional accent from the markers. You may even make several batches without adding color as I did. |
|
|
9. Start in a corner and rub the dried rubber cement with your fingers making a rolled booger. Continue rolling until the booger roll is the desired thickness. Tear the booger from the plastic surface. You may end up with a long string that can be torn into smaller pieces. Roll some of the cement into little balls. Lump pieces together into interesting shapes.
|
|
10. MAKE BOOGERS – you’re a pro already!
|
|
11. Pile all of the completed boogers into one corner of your plastic surface or save them on a paper plate for later. You may choose to be truly artistic and make a booger painting. If so, I would separate the colors of boogers keeping all of the red ones in one pile with the greens and browns in other piles. |
|
|
12. Start making your booger ball. These boogers stick together rather nicely without any added glue. Clump a bunch together to start the ball and continue to roll the ball in the pile until all of the boogers are stuck to it.
|
13. REPEAT.
|
|
|
14. If you’re anxious to have a big ball without the time investment to really make a “real” one, you can start with a superball or other rubber ball. I haven’t tried this but I imagine if you coat the ball with rubber cement and let it dry, the new boogers should stick nicely and you’ll have a big fat ball of boogers in no time. |
|
|
|
|
15. You might find a cool box to put your booger ball in like I did at a craft store. If you get your ball big enough, you can use those display products designed for baseballs – that would be WAY cool.
16. Be careful – this booger ball is NOT edible! |
There are some things to consider before you begin to make your booger ball:
• Why in the world would anyone want to make a booger ball?
• You may not score points with your significant other for taking on this craft project – no matter how creative your final creation ends up.
• Kids LOVE boogers and the idea of anyone really having a booger ball fascinates them. Keep your ball a secret, saving it only for special occasions. Your grandkids/nieces/nephews will think you’re the coolest grandpa/grandma/aunt/uncle ever.
• Life is too short not to make our own booger ball!
• This is a messy project using harmful chemical glue products – don’t let kids get hurt. The markers will stain your fingers for a time (even though they claim to be washable).
• Your fingers may become sore and a bit raw after a few hours of booger manufacturing.
• Please don’t eat your boogers.
So there it is; how to make a booger ball. If you enjoy this tutorial you might consider hiring me to develop one of your wacky ideas. Check out our site to see what else we do and how we can help you in the future. God gave us way too much creativity, but we’re willing to share! Send us a photo of your booger ball creation and we might add it to the Booger Ball Hall of Phlegm.
Update: Ellen loved her booger ball. Here’s the note she sent me:
Thanks for stopping by! -Amos
|